| Laitla Part # | Equiv Part # | Name and use | Used on model(s) | List Price | ||
| 269-0101 | 269T9312 | Spanner wrench - torquing and removal of 269A1315 main rotor thrust bearing nut | C | 428.59 | ||
| 269-0102 | 269A9228 | Spanner wrench - torquing and removal of 269A1306 main rotor thrust bearing nut | A | B | 395.00 | |
| 269-0103 | 269T9231 | Spanner wrench - torquing and removal of 269A1340 main rotor droop stop nut | A | B | C | 165.00 |
| 269-0104 | 269T9308-1 | Box end wrench - special ground for clearance to install and remove flapping hinge bolt/nut | C | 409.70 | ||
| 269-0105 | 9559 | Box end wrench - special ground for clearance to install and remove flapping hinge bolt/nut | A | B | 409.70 | |
| 269-0106 | 269T1221 | Socket - torquing and removal of SL619NF pitch shaft/pitch case retaining nut | A | B | C | 581.62 |
| 269-0107 | 269A9206 | Socket - adapter for measuring the drag torque on the main rotor friction dampers. Not used for elasomeric dampers. | A | B | C | 399.77 |
| 269-0108 | 9550 | Puller - for removing the main rotor hub and lifting eye when installed with wet zinc | A | B | C | 1200.00 |
| 269-0109 | 269T9278 | Tube - for removing the main rotor driveshaft and main rotor thrust bearing | A | B | C | 602.58 |
| 269-0110 | 9562 | Tool set - for installing and removing main rotor flapping hinge bearings while hub is on the helicopter | A | B | C | 990.00 |
next
Laitla Tool Company
435 N. Main St.
Cherryfield, Maine 04622
207-546-7564
207-546-7126 FAX
sales@laitlatool.com
435 N. Main St.
Cherryfield, Maine 04622
207-546-7564
207-546-7126 FAX
sales@laitlatool.com